Bluetooth headphones and sound quality: AAC, aptX and LDAC explained
Bluetooth almost always compresses. The codec decides how much. Here is how to tell what is reaching your ears.
- A codec is how your phone compresses music to send it to wireless headphones.
- iPhone uses AAC; many Android phones also support aptX and LDAC, which carry more data.
- Only aptX Lossless reaches CD quality without loss, and both phone and headphones must support it.
- Before the codec, the headphones matter: their frequency response and how they fit.
Many people ask me whether it makes sense to switch on lossless in Spotify or Apple Music with wireless headphones. Others wonder why the same headphones sound better with one phone than another. In both cases the answer depends on a piece of technology almost nobody looks at: the Bluetooth codec.
In this article I explain what it is, which ones matter, what your phone uses and how much it really matters for what you hear.

What a codec is
Bluetooth has limited bandwidth: it cannot carry all the data of an uncompressed track. So before sending music, the phone compresses it with a codec. The headphones receive the data and decode it back into sound.
That means even if you play a lossless file, a second compression happens between phone and headphones. Final quality depends on how good that codec is and how much data it can carry.
The main codecs
| Codec | Where you find it | Quality |
|---|---|---|
| SBC | every device | basic |
| AAC | iPhone, iPad | good, about 256 kbps |
| aptX | many Android phones | up to 352 kbps, lossy |
| aptX HD | some Android phones | 24-bit, about 576 kbps, lossy |
| LDAC | many Android phones, Sony headphones | up to 990 kbps, lossy |
| aptX Lossless | some Android phones and recent headphones | CD quality, lossless |
| LC3 (LE Audio) | recent devices | efficient, designed for low power |
SBC is the mandatory codec: everything supports it, and it is used when nothing better is shared. It works, but it is the simplest.
AAC is Apple’s choice. On iPhone it sounds very good, because Apple has optimised it thoroughly. On some Android phones the implementation is less refined.
aptX and aptX HD are Qualcomm’s, common on Android phones with Snapdragon chips.
LDAC is Sony’s. At 990 kbps it has the most bandwidth among common codecs, but it needs a stable signal to keep it: with interference it drops to 660 or 330 kbps.
aptX Lossless is the only one that carries CD quality, 16-bit/44.1 kHz, without loss when conditions allow. Both phone and headphones must support it.

What it means for you
If you have an iPhone. The connection uses AAC even if your headphones support aptX or LDAC. Well-implemented AAC sounds very good: it is no disaster. For true lossless with Apple headphones you need the cable: AirPods Max support it when connected via USB-C.
If you have an Android phone. Check in developer options which codec you are using. You can often choose LDAC and its quality. LDAC at maximum needs a stable signal: in a crowd or with the phone in your pocket it can drop.
Lossless streaming. Over standard Bluetooth it does not arrive intact, because there is not enough bandwidth. To really hear it you need wired headphones, a lossless codec or Wi-Fi speakers. More in the article on lossless streaming on Spotify, Apple Music and Tidal.
How much it really matters
Much less than people think. In order of importance for what you hear:
- The headphones. Frequency response, drivers, build.
- The fit. An earbud that does not seal the canal loses half its bass. Try different tip sizes.
- The environment. On the underground, noise masks detail. Noise cancelling helps more than any codec.
- The song’s master. A well-made song sounds good even in AAC.
- The codec. It matters, but at the bottom of the list.
The best headphones with the worst codec sound better than the worst headphones with the best codec.
Other details that make a difference
Latency. High-quality codecs can add delay. For video the phone usually compensates; for games and playing an instrument it can be annoying.
The app’s EQ. Many headphones have an app with an EQ. Starting from “neutral” or “flat” and making small corrections is the safest route.
Battery. High-quality codecs use more power.
An engineer’s advice
Before the codec, the headphones matter: their frequency response, how they sit on your head, how well they isolate. Many consumer headphones boost bass and treble to sound more impressive. Great for listening; not for judging a mix.
I check every master on the most common wireless earbuds too, because that is where a large share of the audience will hear it. If you make music, read the guide to mixing on headphones.
Frequently asked questions
How do I see which codec I am using? On Android, in developer options, under the Bluetooth audio codec setting. On iPhone it is always AAC.
Do wired headphones always sound better? With headphones of equal quality, yes: no extra compression. But a good wireless pair beats a poor wired one.
Is LDAC lossless? No. It is an excellent codec, but lossy.